The development of bio-based insulation materials requires concepts that combine low apparent density, stable pore structure and sufficiently controlled drying. In this study, duck-feather-reinforced soy protein isolate (SPI) foams were produced from aqueous dispersions by thermal stabilisation at 120 °C. The influence of calcium chloride (CaCl2) dosage was investigated using a broad screening series followed by a refined investigation of the technically relevant range between 50 and 100 mmol CaCl2 per 200 g SPI. This approach enabled the identification of a dosage window that provides sufficient matrix stabilisation without excessive salt addition. The resulting foams were evaluated regarding pro-cessability, thermal conductivity, apparent density and compressive behaviour. Thermal conductivities of approximately 52?53 mW/(m·K) were achieved at mean apparent densities of approximately 210?220 kg/m3. The results indicate that foam performance is governed by the interaction of moisture removal, matrix consolidation and pore stabilisation during drying. Future work may extend this approach to other calcium-based mineral additives to improve drying behaviour, moisture resistance, structural integrity and handling stability in building-material-oriented formulations.
mehr| Titel | Protein-Based Insulation Foams from Soy Protein Isolate: Influence of CaCl2 Addition on Foam Formation and Thermal Performance |
|---|---|
| Medien | ce/papers |
| Verlag | Wiley |
| Heft | 6 |
| Band | 9 |
| Verfasser | Simon Schrögel, Prof. Dr. Robert Honke |
| Seiten | 1514-1521 |
| Veröffentlichungsdatum | 27.10.2026 |
| Zitation | Schrögel, Simon; Honke, Robert (2026): Protein-Based Insulation Foams from Soy Protein Isolate: Influence of CaCl2 Addition on Foam Formation and Thermal Performance . ce/papers 9 (6), 1514-1521. DOI: 10.1002/cepa.70976 |